👀 Small Damage Stands Out
A narrow crack or separated edge is often the first thing you notice when you walk up to your car.
Spend $50 more to get FREE shipping!
Subtotal$0.00
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
👀 Small Damage Stands Out
A narrow crack or separated edge is often the first thing you notice when you walk up to your car.
💸 Minor Body-Shop Visits Add Up
Paying for a full appointment can feel excessive when the problem is a small, non-structural plastic repair.
🌬️ Loose Trim Can Get Worse On The Road
Wind, vibration, and repeated driving can keep pulling at an edge that is already loose or misaligned.
🧴 Standard Glue Can Get Messy Near Paint
Wide applicators and runny excess make it harder to place adhesive neatly inside a tight bumper or trim gap.

RESTORE YOUR CAR'S CLEAN LOOK
For small, non-structural cracks, separated bumper edges, and loose exterior trim, this automotive-focused adhesive helps bring plastic pieces back into clean alignment.
Clean and dry the repair area, test-fit the pieces first, then secure them in position while the adhesive develops its hold.

PUT THE HOLD EXACTLY WHERE YOU NEED IT
The narrow red nozzle guides adhesive into slim seams, cracked plastic edges, and hard-to-reach trim gaps where a wide bottle opening would be difficult to control.
Apply a small amount inside the repair gap, keep it off surrounding paint, and align the pieces before the adhesive begins to set.

FAST-SETTING GRIP BUILT FOR THE ROAD
The fast-hold formula develops an initial grip quickly, reducing how long you need to support a small trim or bumper repair by hand.
Keep the pieces secured and allow the adhesive to cure fully before driving or exposing the repair to rain. Once cured, the bond is designed for normal road vibration, wind, and wet weather.

20ML TOOLBOX SIZE FOR WEEKEND TOUCH-UPS
The compact 20ml (0.68 fl oz) bottle fits easily with your garage or roadside tools, ready for small bumper cracks, popped trim edges, and quick exterior touch-ups.
Because the precision nozzle applies only a small amount at a time, one bottle can handle multiple minor repairs depending on the size of each gap and how much adhesive is needed.
🚗 Automotive Plastic Focus
Made for minor bumper cracks, separated plastic edges, and loose exterior trim.
🎯 Controlled Application
A narrow red nozzle helps place adhesive inside tight gaps instead of across nearby paint.
⚡ Fast Initial Grip
Develops a quick hold while the repair remains secured for full curing.
💧 Water-Resistant After Cure
Creates a firm bond intended for rain and normal driving conditions once fully cured.



The precision nozzle helps keep adhesive inside the repair gap, but careful application is still essential. Protect the surrounding finish, avoid direct paint contact, and follow the product instructions for accidental spills.
The fast-setting formula develops an initial grip quickly. Keep the pieces aligned and secured, then allow the adhesive to cure fully according to the product instructions before driving.
Once fully cured, the water-resistant bond is designed for normal rain, road vibration, and highway airflow. Inspect the repair before driving and do not use it as a substitute for damaged structural fasteners.
Each bottle contains 20ml (0.68 fl oz). The number of repairs depends on gap size and the amount applied, but the precision nozzle helps limit waste during multiple minor touch-ups.
Use it only for suitable minor plastic cracks and loose trim. Large cracks, missing plastic, damaged mounting points, safety-related parts, or pieces under heavy load should be assessed by a qualified repair professional.