Kitchen Sink Soap Dispenser 🧼 – Convenient Countertop Cleaning Accessory

🔄 1. 360° Rotating Spout

Turn the dispenser spout toward your sponge, sink or cookware. The adjustable direction makes dispensing convenient from either side.

🧴 2. Connects Directly to a Large Soap Bottle

The extension tube reaches directly into a full-size dish soap container, eliminating the need for a traditional small refill reservoir.

✨ 3. Helps Clear the Countertop

Store the large detergent bottle inside the cabinet beneath the sink, reducing countertop clutter and helping the washing area look cleaner.

👆 4. Simple Press-to-Dispense Operation

There is no need to lift, open or tilt a soap bottle. Press the pump with one hand to dispense soap onto a sponge, brush or dish.

📏 5. Approximately 100 cm Extension Tube

The flexible one-metre silicone tube provides plenty of reach and can be arranged around the available space inside the cabinet.

🚫 6. Less Frequent Refilling

Using a large soap bottle reduces the need to repeatedly remove a small container, pour in detergent and clean up accidental spills.

Step 1: Check the Mounting Hole
Make sure the sink or countertop has a suitable dispenser hole and enough space underneath for a large soap bottle.

Step 2: Install the Pump
Insert the threaded pump section through the mounting hole from above. Install the washer and fastening nut underneath, then tighten securely.

Step 3: Connect the Suction Tube
Push one end of the silicone tube firmly onto the suction connection at the bottom of the pump.

Step 4: Insert It into the Soap Bottle
Feed the other end of the tube through the bottle-neck holder and place it inside the large detergent bottle.

Step 5: Position the Tube
Make sure the tube reaches close to the bottom of the bottle without pressing tightly against it.

Step 6: Prime the Pump
Press the pump several times to remove air from the tube. Continue pressing until the soap reaches the pump and begins dispensing.

Step 7: Adjust the Spout
Rotate the spout toward the sponge, sink or cookware, then dispense as needed.

• Rinse and dry the tube before the first installation.
• Avoid sharp bends, knots or kinks in the tube.
• Keep the suction end submerged in the liquid.
• Flush the tube with warm water before changing liquids.
• Do not use liquids containing particles or hardened residue.
• Very thick soap may require additional presses during priming.

Customer Reviews ⭐

What’s in the Box 📦

• 1 × Silver dispenser pump
• 1 × Countertop mounting assembly
• 1 × Approximately 100 cm silicone suction tube
• 1 × Bottle-neck tube holder

* Dish soap and the soap bottle are not included.