✨ Kitchen Sink Soap Dispenser | 1M Silicone Extension Tube, Rust‑Proof Stainless Steel

🔄 1. 360°旋转出水口

将分配器喷嘴转向海绵、水槽或厨具。可调节方向的设计让您无论从哪一侧都能方便地取用。

🧴 2. 可直接连接到大号皂液瓶

延长管直接伸入全尺寸洗洁精容器中，无需传统的小型补充液容器。

✨ 3. 有助于清理台面

将大瓶洗涤剂存放在水槽下方的橱柜里，减少台面杂物，使洗涤区看起来更干净整洁。

👆 4. 简单的按压式出料操作

无需提起、打开或倾斜洗手液瓶。只需单手按压泵头，即可将洗手液挤到海绵、刷子或餐具上。

📏 5. 约100厘米延长管

一米长的柔性硅胶管提供了充足的延伸范围，可以围绕橱柜内的可用空间进行布置。

🚫 6. 减少补水频率

使用大容量的肥皂瓶可以减少反复取出小容器、倒入洗涤剂和清理意外洒出的肥皂的需要。

步骤 1：检查安装孔
确保水槽或台面有合适的分配器孔，并且下面有足够的空间放置一个大号皂液瓶。

步骤二：安装水泵
将带螺纹的水泵部分从上方穿过安装孔。在下方安装垫圈和紧固螺母，然后拧紧。

步骤 3：连接吸管
将硅胶管的一端牢牢地推到泵底部的吸管连接处。

Step 4: Insert It into the Soap Bottle
Feed the other end of the tube through the bottle-neck holder and place it inside the large detergent bottle.

Step 5: Position the Tube
Make sure the tube reaches close to the bottom of the bottle without pressing tightly against it.

Step 6: Prime the Pump
Press the pump several times to remove air from the tube. Continue pressing until the soap reaches the pump and begins dispensing.

Step 7: Adjust the Spout
Rotate the spout toward the sponge, sink or cookware, then dispense as needed.

• Rinse and dry the tube before the first installation.
• Avoid sharp bends, knots or kinks in the tube.
• Keep the suction end submerged in the liquid.
• Flush the tube with warm water before changing liquids.
• Do not use liquids containing particles or hardened residue.
• Very thick soap may require additional presses during priming.

Customer Reviews ⭐

What’s in the Box 📦

• 1 × Silver dispenser pump
• 1 × Countertop mounting assembly
• 1 × Approximately 100 cm silicone suction tube
• 1 × Bottle-neck tube holder

* Dish soap and the soap bottle are not included.