📐 Adjustable Tile Hole Locator – Measure, Lock & Transfer
📐 Adjustable Tile Hole Locator – Measure, Lock & Transfer
Couldn't load pickup availability
- American express payment method
- Apple pay payment method
- Diners club payment method
- Discover payment method
- Google pay payment method
- Master payment method
- Paypal payment method
- Shopify pay payment method
- Visa payment method
-
Ordered
- - -
Order Ready
- - -
Delivered
📐 Adjustable Tile Hole Locator – Measure, Lock & Transfer
One Wrong Hole Can Ruin the Whole Tile
Stop rebuilding complicated pipe positions with a tape measure. Copy the existing layout, lock it in place and transfer the position directly onto your tile.
🔧 Get the Tile Locator
Stop Guessing Where the Hole Should Go
A few millimeters can be the difference between a clean installation and a tile that no longer fits.
Traditional Measuring
Copy the Layout 📐
Let the Wall Tell You Where the Hole Goes
Position the locator around the pipe, socket or other fixed point and use a reliable edge as your reference.
Once everything lines up, tighten the adjustment so the geometry stays in place.
Copy It. Lock It. Transfer It. Mark It.
Adjust to the Layout — Not the Other Way Around
The slotted ruler design allows the two sections to move and rotate around the locking point, making it easier to reproduce different wall layouts.
Common Hole Sizes Are Already Built Into the Tool
Use the integrated circular guides to help mark common plumbing and fixture openings without reaching for another template.
25 mm
Approx. 0.98 in circular guide.
40 mm
Approx. 1.57 in circular guide.
45 mm
Approx. 1.77 in circular guide.
The end section also incorporates an approximately 55 mm / 2.17 in positioning profile.
Rigid Enough to Hold the Measurement You Just Set
A positioning tool only works when it stays where you put it. The stainless-steel ruler provides a firm, reusable structure for everyday layout work.
Engraved Scale
Measurement markings help with layout and alignment.
Locking Fastener
Secure the angle and position before transferring the layout.
Reusable Tool
Designed for repeated renovation and installation projects.
Useful Anywhere the New Surface Has to Match What's Behind It
Water Pipes
Transfer plumbing positions before drilling tile.
Outlets & Boxes
Help reproduce positions for compatible wall openings.
Tile Installation
Useful when laying ceramic, stone and similar panels.
Compact Enough for the Toolbox — Long Enough for Common Layout Work
Get the Mark Right Before the Drill Touches the Surface
The locator doesn't drill the hole for you. Its job is to help you establish where that hole needs to be before you make an irreversible cut.
Less Tile Waste
Reduce mistakes caused by rebuilding complicated measurements.
Less Re-Measuring
Transfer the physical layout instead of calculating every point again.
More Confidence
Verify the final position before making the cut.
One for the Toolbox — Or Stock Up for the Crew
Your current product page offers 1, 2 and 3 locator sets.
1 Set
For personal DIY or everyday installation work.
2 Sets
Keep one in another toolbox or share with a coworker.
3 Sets
A practical option for a small installation crew.
• This is a measuring, positioning and marking tool. It does not drill or cut tile.
• Always re-check the transferred mark before drilling or cutting.
• Use the same reference edge when measuring the wall and transferring the measurement to the tile.
• Tighten the locking fastener securely before moving the locator.
• Use a drill bit, hole saw or cutting tool appropriate for the material you are working with.
• Actual pipe and fixture diameters vary. Confirm the required opening size before cutting.
Before You Make the First Cut
What does this tool actually do?
It helps copy the position of an existing pipe, opening or fixture and transfer that location onto a tile or compatible panel.
Does it drill the hole?
No. It is a positioning and marking tool. A separate drill, hole saw or cutting tool is required.
How long is the locator?
The main locator ruler shown on the current product page is approximately 400 mm / 15.75 inches long, with an approximately 300 mm / 11.81 inch cross ruler.
What hole guides are included?
The current product image shows approximately 25 mm, 40 mm and 45 mm circular guides, plus an approximately 55 mm end profile.
Can the rulers rotate?
Yes. The slotted construction allows the sections to slide and rotate around the locking point.
Is it only for professional tilers?
No. It can also be useful for DIY renovation work, provided the user follows proper measuring, marking and cutting procedures.
Measure the Real Position. Lock It. Transfer It.
A simpler way to reproduce pipe and opening positions before drilling into a tile you don't want to waste.
🔧 Get the Adjustable Tile LocatorStainless steel · Approx. 400mm main ruler · 1 / 2 / 3 set options
